| Ignatz's Bricks 2006-07-24, 9:21 pm |
|
> Ignatz's Bricks wrote:
>
Citizen asks:
[vbcol=seagreen]
> "it seems to bleed less" ??? I never had any bleeding. Do others??
LMac was asking about differences. I wrote "seems" because the
difference is so small that it is hard to tell if it is real or is a
normal shot-to-shot variation. The biggest causes of bleeding, IMHO,
are not being completely flaccid when injecting and allowing one's hand
to shake while injecting and thus causing the needle to wiggle while
inside your pecker. The only time I allow my needle to warm up is when
I pre-load it, if I'm not going to be home when injecting, so most of my
injections are fresh from the frig.
My usual bleeding is a blood spot about 1/16" inch (1.5mm)diameter, or
less, on the cotton swab used to apply pressure for one minute. The
range is from none to about 3/8th inch (9mm) on the alcohol swab and
those big ones were back 5 years ago when I was using a 29 guage needle
because I didn't know any better.
IB.
|